Convertible crib – Use the Phillips screwdriver and the wood screws 5/8 inch (1.5 cm) to screw the brackets on the right and left legs. Place the barrel nuts into the holes pre-drilled in the top and bottom of the left and right sides of the head. With Allen head screws 4 inches (10.16 cm), screw the left and right legs to the head. And using the Phillips screwdriver flat wood screws 1 and 3/4 inch (4.44 cm) to screw the feet to the lower portions of the posts. Barrel nuts pushed into the holes in the top and bottom of the left and right sides of the front rail.
With the Allen wrench, screw Allen head screws 4 inches (10.16 cm) to the right and left barrel nuts on the front barrier legs. Place the barrel nuts into the holes on the side panel convertible crib. Screw Allen head screws 2 1/4 inches (5.17 cm) to the front rail and headboard. Align the slots on the sides with side rails, attaching them to the Allen head screws 1/2 inch (1.25 cm).
Adjusts the hooks (attached) under spring (four corners) so that do not point to the frame. Place the frame with the flat side up convertible crib.