Make sure that it is not wider than the width of the platform bed. Place the head face on capitoneado filling. If you want softer, you can insert a piece of foam padding between the header. Wrap the edges of padding around the bottom edge of the header. Spread the fabric you chose to cover the head. Pull the bottom of the fabric below the bottom edge of the header and engrápala instead. Pull the rest of the fabric over the top edge of the header.
Cropped Cotton canvas lining the size of the header platform bed. Place your liner on the back of the head; fold it down to one inch (1.27 cm) of uncovered edges engrapas while the bottom edge first, then the upper and then the sides, stretching as you go.
12 Photos Gallery of: Bulid Headers for Platform Bed
Cut two 1 feet 4 inches (2.54 by 10.16 cm) long enough to reach from the bottom side of the bed platform is against the wall until at least two thirds of the way to the back header.Places the header on the back frame platform , then drill three holes spaced uniformly from side to side of the bottom of the two legs to the frame and the platform bed.