Outdoor storage sheds – Lift the front of the shed. You have to raise enough for the tube PVC from below skates. Raise the shed with the cat. This time, you have to lift the shed enough to place pipes PVC below skates at intervals of 10 feet (3 m) approximately. Connect the towline to the mower. In the shed, connect the cable so that it passes through the skates. Make operate the mower slowly forward until all slack rope tow is removed.
Move the mower forward, moving the shed, without effort, behind you. Frena every 10 feet (3 m) and move pipes PVC from the back of the shed to the front. In rare cases, you may need to lift the front of the shed, but in most circumstances to pull forward the shed will skates slip on pipes PVC . Repeat this step until you reach the new location of the outdoor storage sheds.
Before removing the tubes of PVC , turn the shed so that it is on the side you want. Raise the outdoor storage sheds with the jack and stands located under the front corners. Remove tubes PVC and replaces any block you used in the original configuration of the shed. Remove the jack stands and cat.